Tiptop Audio — RS808


RS808 Manual PDF


Tiptop Audio RS808 Cheat Sheet

The RS808 is a TR-808 Rimshot/Clavs sound generator for Eurorack, offering expanded control over classic 808 percussion sounds.


Quick Start

  1. Connect GATE IN to a gate/trigger source.
  2. Connect RS/CL OUT to your audio system.
  3. Set LEVEL halfway, both toggle switches down (Rimshot).
  4. Set SNAP ~30%, PITCH ~50%.
  5. Flip both toggles up for Clavs; experiment with combinations for other sounds.

Panel Overview

Control/Jack Function
LEVEL (Knob) Output volume of the module.
SNAP (Knob) Height/strength of internal envelope (adds "snap" to sound).
PITCH (Knob) Sets frequency/pitch of the sound (not on original TR-808).
ACCENT (Knob) Adjusts dynamic accent/gain for triggered notes.
ACCENT IN (Jack) Gate/trigger for accent—sets loudness/attack dynamically.
Voltage Range: 0 to 10V gate preferred.
GATE IN (Jack) Main gate/trigger input to fire sound.
Voltage Range: 0 to 10V gate/trigger.
RS/CL OUT (Jack) Main audio output. Output level: Eurorack line level (~10Vpp or less).
Toggle Switches (2x) Sound selection:
- Both down: Rimshot
- Both up: Clavs
- Left up/Right down: Blend/Hybrid
- Left down/Right up: Short click

Sound Selection via Toggles


Patch Reference

Jack Type Expected Signal Function
GATE IN CV input 0–10V gate/trigger Triggers sound
ACCENT IN CV input 0–10V gate/trigger Dynamic accent control
RS/CL OUT Audio output 10Vpp max (typical) Module output

Additional Notes


For more, visit the RS808 product page.


Generated With Eurorack Processor