Noise Engineering — Zularic Repetitor

Noise Engineering Zularic Repetitor Cheat Sheet

Jack	Purpose	Voltage Range
Beat	Clock input (advances time)	Triggers ≈2.5V & up
Measure	Measure reset (resyncs parts)	Trigger ≈2.5V & up
Mother CV	Select Mother pattern or modulate pattern	~7V
Child 1-3 CV	Time offset for each Child relative to Mother	~7V

Jack	Purpose	Voltage Range
Mother Out	Main pattern gate output	Gate ≈6V
Child 1-3 Out	Offset pattern gate outputs	Gate ≈6V

Name	Type	Description
Mother	Knob + CV	Selects Mother pattern (acts as attenuator for Mother CV)
Child 1-3	Knob + CV	Controls beat offset from Mother for each "Child" output (acts as attenuator for Child CV ins)
World	Toggle	Select Old World (Indian/African/Vodou) or New World (Funk, Rock, etc.) pattern bank
RST	Button	Pauses time advance while held, resets to measure start on release
LEDs	Indicator	Show selected mother pattern and world bank

Clock: Patch a clock to Beat for operation.
Reset: Optionally patch a reset/measure pulse to Measure for periodic resync.
Patterns: Select pattern set with Mother knob (+ CV modulation).
Offsets: Use Child 1-3 knobs (or CV) to shift pattern in time vs Mother output.
Pattern Source: Toggle World for Old/New World rhythms.
Gate Outputs: Patch Mother and up to three Child outputs to envelopes, drum modules, etc.

Divider Mode: Switches to clock-divider (~1, 2, 3 sections, controllable by CV/knob).
Random Mode: Random gate generation, probability set by knob/CV.

Start with basic clock to Beat, play with Mother and Child knobs.
Add slow LFO, random CV, or stepped sequencer to Mother/Child CVs for variation.
Try using divided clocks or rhythm generators to dynamically shift time offsets.