Intellijel — MultiGrain

Intellijel Multigrain v1.2 Manual (PDF Previewed)
(Replace with actual link to PDF if available online)

Intellijel Multigrain v1.2 Cheat Sheet

Live Stereo Morphing Granular Sampler

Jack	Type	Voltage Range	Description
IN L	Input	Audio	Left audio input
IN R	Input	Audio	Right audio input
OUT L	Output	Audio	Left audio output
OUT R	Output	Audio	Right audio output
NEXT	Input	>2V trigger	Advances to next Sound; can be set as RESET for SCAN
GATE	Input	>2V gate	Triggers current Sound
SELECT	Input	-10V to +10V (±10V, rectified)	Selects which Sound to play
X	Input	-10V to +10V (±10V)	Assignable CV modulation input
Y	Input	-10V to +10V (±10V)	Assignable CV modulation input
Z	Input	-10V to +10V (±10V)	Assignable CV modulation input
MORPH	Input	-10V to +10V (±10V)	CV input for MORPH fader
SYNC	Input	>2V clock/pulse	Syncs grain rate/position for Sounds/Live input
A	Output	-5V to +5V (±5V)	Assignable CV output (options per Alt Panel)
B	Output	-5V to +5V (±5V)	Assignable CV output (options per Alt Panel)
SD Card		N/A (microSD slot)	microSD for samples, projects, presets (≤32GB, FAT-32)

◎SAMPLE: Record/assign sample, resample, freeze (read mode-dependent)
RATE–SIZE (Link): Ties RATE and SIZE behavior
SIZE–PITCH (Link): Ties SIZE and PITCH behavior
REVERSE: Grain playback direction (or ping-pong, hold to enable)
SCENE A / SCENE B: Select/use/edit either scene per Sound
ALT / EXIT: Hold/tap for Alt/settings/exit page
CLEAR: Clear/reset modulation, scenes, sounds, memory etc
RAND / X / Y / Z: Assignable mod pages, per-parameter attenuversion for random/external CV
THRU: Input monitoring/bypass to output (and Blur, with latch/lock options)
LATCH: Sustain sound, toggle latching
SOUND 1–8: Trigger/select 8 Sounds (manual or CV control)

* MORPH ATT (not panel-labeled): Attenuverter for Morph CV

Function	Source	Range	Usage
X/Y/Z Inputs	CV in	±10V	Mod-assigned to (almost) any parameter, incl. Reverse
Morph Input	CV in	±10V (±5V sweeps)	Fader position modulated
Gate/Next Input	Gate/Trig	>2V	Trigger Sound or advance/scan/reset
Select Input	CV in	±10V (rectified)	Sound selection via CV (0V–5V mapped 1–8)
Sync Input	Trig/Clock	>2V	Syncs grain rate or Live Sound positions
A/B Outputs	CV out	±5V	Envelope, S&H, random, morph, grain triggers, etc. (assignable)

Load sample: ALT > /PROJECT, /WAVS, /RECS > assign to SOUND (preview by pressing/latching)
Record sample: Press ◎SAMPLE to record; press ◎SAMPLE again to stop; assign to SOUND or save
Live Sound: Hold SOUND, press ◎SAMPLE (button turns magenta/pink)

Adjust Knobs: Direct control over granular/sample params
Assign Mods: On RAND/X/Y/Z mod page, turn knob for attenuversion
Copy/Randomize: Hold/press relevant controls (e.g. Hold SCENE A, press SCENE B to copy)

Live/Looping: Loop: Hold SOUND + press ◎SAMPLE. Freeze w/ ◎SAMPLE. Save to SD by long-press.
Trim: After capture, long-press ◎SAMPLE for advanced trimming/editing.

Action	Combo
Clear Sound	Hold CLEAR, press SOUND (once=settings; twice=delete sample)
Latch sound, keep latched, edit	Enable LATCH, press SOUND, adjust params
Copy Sound	Hold SOUND, press destination SOUND
Morph All Scenes/Sounds	Hold LATCH, or Scene, or both, then move knob
Assign modulation	Hold RAND/X/Y/Z (mod page), turn knob
Modulate Param Across Sounds	Hold LATCH + param on mod page
Enable Live Sound	Hold SOUND, press ◎SAMPLE
Randomize Scene/Sound/X/Y/Z	Hold RAND, press SCENE/SOUND/X/Y/Z
Enable THRU/Bypass/Lock	Press/hold LATCH + THRU; hold to lock
Enter System Settings Page	ALT + long-press PROJECT (~4s)
Reboot Module	Hold LATCH + CLEAR (~4s)
Quick Open Quantizer	Long press QUANT
Quick Save/Load Preset	Long press SAVE or LOAD

(For a full shortcut table, see manual page 53–54)

Projects/Presets: 48 Projects (6x8); 48 Presets per Project
Samples: /PROJECT (per-project: 128), /WAVS (global: 128), /RECS (global: 1024)
Firmware Upgrades: USB-C, hold boot and follow Intellijel Updater