Earthquaker Devices — Afterneath
Download the Afterneath Eurorack Module Manual (PDF)
EarthQuaker Devices Afterneath Eurorack "Cheat Sheet"
OVERVIEW
- Type: Reverberation Effect (Multi-delays → reverb-like echoes)
- Audio Path: Analog dry, digital wet
- Width: 16hp | Depth: 31.75 mm | +12V: 95mA, -12V/5V: 0mA
- Skiff-friendly
- Input Level: Instrument to modular (set by Input knob)
CONTROLS SUMMARY
Top Row (Left → Right):
- Input (knob): Adjusts gain for audio input (fully CW = instrument; fully CCW = modular)
- Dampen (knob): Wet signal tone (CW = darker, CCW = brighter)
- Reflect (knob): Feedback/regeneration (turn up for longer, self-oscillates at extremes; also an attenuator for Reflect Return)
- Mix (knob): Wet/dry mix (not fully wet unless Dry Kill engaged)
- Dry Kill (toggle): Kills dry signal (output = wet only)
Middle Row:
- Drag (knob): Space/spacing for delay lines = “warp speed” effect (CW = shorter, CCW = longer delays; pitch shift when changed live)
- Mode (knob): Selects 1 of 9 Drag Modes (see below)
- Diffuse (knob): Smears/smooths repeats (CW = more diffuse & reverb-like, CCW = sharper)
- Length (knob): Controls reverb decay
JACKS
| Type |
Function |
Notes/Voltage Range |
| Input |
Main audio input |
Instrument to modular, adjustable via Input knob |
| Reflect Send |
Feedback loop send, for patching external FX etc. |
Signal always present, does not interrupt internal feedback |
| Reflect Return |
Return for feedback loop; disables internal loop when patched |
Doubles as 2nd audio input if feedback not needed; Reflect knob attenuates |
| Output |
Main audio output |
|
CV INPUTS (All with Inverting Attenuators)
- Each parameter with CV has a dedicated inverting attenuator:
- Unity gain: attenuator full CW
- Inverted: attenuator full CCW
- Fully attenuated (off): at 12 o’clock
| Jack |
Modulates |
Voltage Range |
| Drag CV |
Drag spacing |
Responds only to +1.6V to +4.1V (Caution: Bipolar signals need offset) |
| Mode CV |
Mode selection |
Not specified (suggest ±5V standard; best results with 0-5V unipolar) |
| Diffuse CV |
Diffuse smearing |
Not specified (±5V typical, see above) |
| Length CV |
Reverb decay length |
Not specified (±5V typical, see above) |
Note:
- Associated knobs act as offsets for incoming CV.
- When self-oscillating, Drag CV supports 1V/oct tracking (see below).
MODES (affect Drag CV/knob behavior)
- Unquantized: Smooth, unquantized over full range
- Unquantized w/Slew: Same as above, but with lag (varispeed tape effect)
- Unquantized 1V/oct: Smooth, scaled to 1V/oct (melodic modulation; self-oscillation VCO)
- Chromatic Scale: 1V/oct CV quantized to chromatic scale
- Major Scale: 1V/oct CV quantized to major scale
- Minor Scale: 1V/oct CV quantized to minor scale
- Pentatonic Scale: 1V/oct CV quantized to pentatonic
- Oct & Fifths: 1V/oct CV – only octaves and fifths
- Octaves: 1V/oct CV – only octaves
Use Mode knob or Mode CV to select. Mode LED displays current selection.
ADVANCED USAGE
- Self-Oscillation:
- With Reflect/Length >12:00, module can self-oscillate (“regenerated reverb” → turns into VCO)
- In Modes 3–9, Drag CV input follows 1V/oct (for keyboard/sequencer tracking)
- Drag CV Input: Only positively responds to 1.6-4.1V unipolar
-
To scale properly:
- Drag CV attenuator full CW, Drag knob at noon
- Modes 3-9
- Length/Reflect > 12:00
- Play octave CV source, find upper Drag knob limit, set just beyond
- Lower Length/Reflect to stop oscillation if needed
-
Pseudostereo:
- Output main & Reflect Send to separate channels for spacious/multichannel effects.
- Patch Reflect Send to mults → other outputs/processing → Reflect Return.
TIPS
- Input knob: Turn up for guitar/synth, down for modular signals.
- Use Inverting Attenuators to fine-tune CV ranges—start with knob noon, attenuator fully CW for external CV.
- Diffuse: Higher for ambient, lower for clarity.
- Self-oscillation = creative oscillator, can track pitch (not perfectly tuned).
QUICK REFERENCE: ALL CONTROLS & JACKS
| Knob/Button/Toggle |
Function |
| Input |
Sets input gain |
| Dampen |
Sets wet signal brightness |
| Reflect |
Sets feedback amount |
| Mix |
Wet/dry blend |
| Dry Kill (toggle) |
Removes dry audio (true "wet-only" out) |
| Drag |
Spacing/"warp" between reverb delays |
| Mode |
Select Drag mode (9 choices) |
| Diffuse |
Amount of smearing/ambience |
| Length |
Reverb decay time |
| Jack |
Function/Modulates |
Voltage Range |
| Input |
Audio In |
Instrument/modular level |
| Reflect Send |
Feedback signal out |
Audio |
| Reflect Return |
Feedback signal in (bypass internal loop) |
Audio |
| Output |
Main Audio Out |
Audio |
| Drag CV |
Modulates Drag |
+1.6 to +4.1V (offset needed) |
| Mode CV |
Modulates Mode selection |
(0-5V recommended) |
| Diffuse CV |
Modulates Diffuse |
(0-5V recommended) |
| Length CV |
Modulates Length |
(0-5V recommended) |
Generated With Eurorack Processor