2hp — Slice


2hp Slice Manual PDF


2hp Slice (Beat Repeat/Glitch Engine) — Quick Reference Cheat Sheet

Jack Reference

Jack Function Voltage Range
Audio Input Signal in for beat repeat/glitch 10Vpp
Audio Output Effected audio out 10Vpp
Clock Input External clock sets beat grid (from 10 BPM up) Audio rate possible
Trig/Gate Input Activates effect (latch or momentary selectable) Threshold: 0.4V
Size CV Input CV control of repeat size (division/multiplier) -5V to +5V

Control Reference

Control Function
Trig Button Manually activate beat repeat. Hold at boot to change mode (latch/momentary)
Trig LED Shows gate mode, clock rate, buffer state:
• Green = Clock rate
• Dim White = Latch
• Dim Purple = Momentary
Size Knob Sets repeat size; range: 2 Bars, 1 Bar, 1/2, 1/4, 1/4 trip., 1/8, 1/8 trip., 1/16, 1/16 trip., 1/32, 1/64, 1/128, 1/256
Triplet Toggle UP = Triplets included; DOWN = Remove triplet divisions/multiplications

Gate Behavior Modes


Installation Summary

  1. Find 2HP space in your rack.
  2. Connect power: Align red stripe on cable with white line on PCB.
  3. Use either 5-pin row on the connector (only 1 row on module).
  4. Mount module with 2.5mm screws and supplied slide nuts.

Specs


Tips & Pairings


Generated With Eurorack Processor