2hp — MMF
MMF Eurorack Filter Module Manual PDF
(No actual link provided, please insert manual link if available)
MMF Eurorack Filter Cheat Sheet
Overview:
The MMF is a compact (2HP) analog multimode filter module for Eurorack systems. It features simultaneous low pass, high pass, and band pass outputs, with voltage control over cutoff frequency and resonance.
Panel Controls & Jacks
| Label |
Type |
Function/Description |
Voltage Range (if applicable) |
| INPUT |
Jack |
Modular-level audio signal input |
N/A |
| FREQ |
Knob + Jack |
Cutoff frequency control knob, with CV input jack below |
CV Input: -8V to +8V (added to knob) |
| RESO |
Knob + Jack |
Resonance amount control knob, with CV input jack below |
CV Input: -5V to +5V (added to knob) |
| LP |
Jack |
2-pole low pass filter output |
N/A |
| HP |
Jack |
2-pole high pass filter output |
N/A |
| BP |
Jack |
2-pole band pass filter output |
N/A |
There are no buttons, sliders, or toggle switches on this module.
Inputs
- Audio Input: Accepts modular-level audio signals.
- FREQ (CV): Modulates filter cutoff, -8V to +8V range.
- RESO (CV): Modulates filter resonance, -5V to +5V range.
Outputs
- LP (Low Pass): Filtered output, 2-pole, 12dB/oct slope.
- HP (High Pass): Filtered output, 2-pole, 12dB/oct slope.
- BP (Band Pass): Filtered output, 2-pole, 12dB/oct slope.
Usage Tips
- Patch your audio signal to INPUT.
- Select either LP, HP, or BP output (or all simultaneously) based on desired filter type.
- Adjust FREQ knob for manual cutoff control, or patch modulation CV for dynamic cutoff movement.
- Adjust RESO knob for resonance, or patch modulation CV for dynamic resonance sweeps (self-oscillation is not specified).
- Use simultaneous outputs for creative parallel or serial filtering.
Generated With Eurorack Processor