2hp — Kick


Manual PDF (image reference)


Kick Eurorack Module Cheat Sheet

Summary

Kick is a flexible analog kick drum synthesizer module. It features CV control over all main parameters, 1V/Octave pitch tracking, and a wide decay/tone range (from sine to overdriven, distorted kicks).


Panel Controls & Jacks

# Name Type Function/Range / Notes
1 TRIG Jack Trigger Input: Accepts gate signals to trigger the kick.
2 TONE Knob + Jack Tone/Character:
Knob - sets from clean sine (center/right) to overdrive (left);
CV Input (-5V to +5V)
3 DECAY Knob + Jack Decay Time:
Knob - sets decay 80ms up to 15s;
CV Input (-5V to +5V, adds to pot)
4 V/OCT Jack Pitch CV Input: 1V/Oct for tonal playing/sequencing;
Adds to Pitch knob
5 PITCH Knob Pitch Control: Sets base frequency of drum sound
6 OUT Jack Audio Output: Drum audio, 10Vpp (peak-to-peak)

Voltage Ranges


Quick Reference Table

Control CV Range Function
TONE (knob + jack) -5V to +5V Sine (center/right) → Overdrive (left); pitch mod (higher when left/right)
DECAY (knob + jack) -5V to +5V Decay time 80ms–15s, CV adds to knob
V/OCT (jack) 1V/oct Tonal pitch/frequency
PITCH (knob) n/a Base pitch of drum
OUT (jack) 10Vpp Drum audio output (patch to mixer/FX, etc.)
TRIG (jack) Gate/Trig Triggers drum envelope

Installation


Suggested Use


Generated With Eurorack Processor