Read the Full Manual PDF Here
(Replace with actual link if available)
Freez is a voltage-controlled looper/freezer for capturing and mangling audio.
- Loop size and sample rate (pitch/bitcrush/grain effects) are voltage controllable.
- Switchable momentary/latching capture.
- Range: from granular/micro loops to 3s buffers.
| # | Name | Type | Description | Voltage Range |
|---|---|---|---|---|
| 1 | IN | Jack | Audio input | 10Vpp |
| 2 | SIZE CV INPUT | Jack | CV input for buffer size. Added to knob position | ±5V |
| 3 | SIZE | Knob | Sets buffer length (max CCW = largest, max CW = smallest, range 9ms–3s, depends on S. RATE) | - |
| 4 | FREEZ LED | LED | Indicates if buffer is frozen (lit = frozen; unlit = passthrough/unfrozen) | - |
| 5 | MODE TOGGLE | Switch | Up: Momentary freeze; Down: Latching freeze | - |
| 6 | BUTTON | Button | Press to (un)freeze audio according to toggle setting | - |
| 7 | TRIG | Jack | Trigger input for freeze/unfreeze (matches button behavior) | - |
| 8 | S. RATE CV IN | Jack | CV input for sample rate (added to knob) | ±5V |
| 9 | S. RATE | Knob | Sets sample rate of recording/playback (CCW = lowest, CW = highest, 2.36k–96kHz) | - |
| 10 | OUT | Jack | Audio output | 10Vpp |
Inputs - IN: Main audio input (10Vpp max) - SIZE CV INPUT: Voltage control for SIZE, ±5V (sums with knob) - S. RATE CV INPUT: Voltage control for S. RATE, ±5V (sums with knob) - TRIG: Trigger or gate for (un)freeze control (matches button toggle mode)
Outputs - OUT: Processed/frozen audio output (10Vpp max)
Knobs/Switches/Buttons
- SIZE: Adjust buffer (loop) length (min 9ms - max 3s, changes pitch/timbre)
- S. RATE: Adjust sample rate (2.36kHz–96kHz, reduces quality/granulates lower)
- MODE TOGGLE:
- Up = Momentary (freeze held while pressed or while gate high)
- Down = Latching (toggle freeze with each press or trigger)
- BUTTON: Manual freeze/unfreeze
- FREEZ LED: Lights when module is in freeze (held/latched) mode