2hp — Euclid

2hp Euclid Manual (PDF)

2hp Euclid Cheat Sheet

Euclid is a 2hp rhythmic pattern generator based on Euclidean algorithms, producing cyclic and musical trigger patterns with flexible step and offset controls.

I/O Jack Reference

Jack / Control Description Voltage Range / Type
TRIG IN Advances the pattern one step Trigger/Gate Input
RESET IN Resets pattern to first step Trigger/Gate Input
LENGTH CV CV control of pattern length 0–5V; summed w/ knob
STEPS CV CV control of active steps 0–5V; summed w/ knob
TRIGGER OUT Output trigger when active step fires +5V, 6ms pulse

Control Reference

Control Function Details
LENGTH (Knob) Sets pattern length (1–16 steps) Full Left: 1, Full Right: 16
STEPS (Pot) Sets # of active steps in pattern Min: 1 step, Center: ½ length, Max: full length
OFFSET POT Sets pattern offset (initial step shift) Full Left: No offset, Full Right: Offset by Length-1
OUTPUT LED Shows trigger output activity Lights when pattern fires an active step

Quick Usage

  1. Connect TRIG IN to your clock source. Each clock pulse advances the sequence.
  2. Connect TRIGGER OUT to your drum(s) or destination module.
  3. Select pattern length (LENGTH knob/CV) from 1 to 16 steps.
  4. Set active steps (STEPS pot/CV) to distribute triggers within the pattern length.
  5. Apply offset (OFFSET pot) to shift the starting point of the pattern.
  6. RESET IN can be used to re-sync pattern start.

All CV inputs accept 0–5V; values add to their respective knobs/pots.

Module Specs

Generated With Eurorack Processor