2hp — Div
Div Module Manual PDF
2hp Div Eurorack Module Cheat Sheet
Module Overview
- 2-channel voltage-controlled clock divider/multiplier
- Multiplies or divides incoming clock by: 1, 2, 3, 4, 5, 6, 7, 8, 16
- Individual controls & CV for each channel
- Dynamic rhythms from a single clock input
- 2 HP width (skiff friendly)
Front Panel Controls
| # |
Label |
Type |
Description |
Voltage Range |
| 1 |
IN |
Jack |
Clock input (shared for both channels) |
Threshold: +2.5V |
| 2 |
RATE 1 |
Knob |
Division/multiplication selector for CH1:
/16 ... /1 ... x16 |
- |
| 3 |
RATE 1 CV |
Jack |
CV control of CH1 rate |
0V–5V |
| 4 |
LED 1 |
LED |
Lit when OUT1 emits a pulse |
- |
| 5 |
OUT 1 |
Jack |
Output clock CH1 |
0V–5V |
| 6 |
RATE 2 |
Knob |
Division/multiplication selector for CH2:
/16 ... /1 ... x16 |
- |
| 7 |
RATE 2 CV |
Jack |
CV control of CH2 rate |
0V–5V |
| 8 |
LED 2 |
LED |
Lit when OUT2 emits a pulse |
- |
| 9 |
OUT 2 |
Jack |
Output clock CH2 |
0V–5V |
Division / Multiplication Settings
- Knob Left:
/16 (slowest)
- Knob Center:
/1 (original clock)
- Knob Right:
x16 (fastest)
- Intermediate positions:
/8, /7, /6, /5, /4, /3, /2, x2, x3, x4, x5, x6, x7, x8
How To Use
- Patch a clock signal to IN (min level +2.5V).
- Adjust RATE 1 and RATE 2 knobs to select division/multiplier for each channel.
- Optionally, patch CVs (0-5V) to RATE 1 CV and/or RATE 2 CV for external modulation.
- Take divided/multiplied clocks from OUT 1 and OUT 2.
- LEDs indicate when each output pulses.
Power Specifications
- +12V: 30mA
- -12V: 3mA
- Depth: 46mm
For more advanced utility and dynamic clock manipulation, use with sequencers, logic modules, or modulation sources.
Generated With Eurorack Processor