2hp — Blur

Manual PDF

2hp Blur Manual PDF

2hp Blur Eurorack Module Cheat Sheet

Description:
Blur is a spectral processor that transforms audio by smearing frequency content, enabling reverb-esque pads and time-stretched textures.

Panel Overview

Jack/Control	Type	Description	Range
`IN`	Input	Main audio input	10Vpp
`TIME`	Knob	Amount of spectral time stretch; x1 at center, up to x16 to the right	-
`TIME` (CV)	CV In	Controls Time parameter	-5V to +5V
`VIBE`	Knob	Spectral spread/frequency wash; left = clear, right = smeared/washed out	-
`VIBE` (CV)	CV In	Controls Vibe parameter	-5V to +5V
`MIX`	Knob	Dry/Wet blend; left = dry, right = wet	-
`MIX` (CV)	CV In	Controls Mix balance	-5V to +5V
`OUT`	Output	Audio output	10Vpp

Quickstart

Patch audio into IN.
Patch from OUT into your system.
Set TIME to control stretch:
Left = normal/short playback
Center = original speed
Right = up to x16 stretch
Set VIBE:
Left = original timbre
Right = washed spectral pad
Set MIX:
Left = dry (original signal)
Right = wet (processed)
Modulate with CV:
Patch CV (−5V to +5V) into TIME, VIBE, or MIX for dynamic control.

Voltage Reference

CV Input	Voltage Range	Function
`TIME` (CV)	-5V to +5V	Spectral time-stretch amount
`VIBE` (CV)	-5V to +5V	Frequency spread/smear
`MIX` (CV)	-5V to +5V	Dry/Wet blending
Input Audio	~10Vpp	Line/Eurorack level
Output Audio	~10Vpp	Line/Eurorack level

Power & Physical

Width: 2HP
Depth: 46mm
Power: +12V 85mA, -12V 7mA, +5V 0mA

Connect the power cable with the red stripe aligning with the module's white line marking!

Patch Ideas

Pad/Pluck: Pair with transient-rich sources (e.g. Pluck) for ambient pads
Layered Ambience: Use before or after reverb for wider pads (e.g. 2x Blur → Verb)
Pitch Processing: Chain with pitch shifting for harmonic textures
Super Saws/Pulse: Hyper saws (Swarm) sound lush when blurred

Generated With Eurorack Processor